These high quality Release Bearings are designed for use with AP Racing Clutches and are suitable for high loads and continuous high speed high temperature operation.

They offer a greater release load capability and superior performance under arduous racing conditions compared to standard production bearings.

The bearings have steel cages and hardened steel shells for durability and are filled with a special high temperature grease.

They have a radiused release fulcrum and are suitable for all straight fingered diaphragm spring clutches. Available with either a 38mm, 50mm or 54mm diameter release fulcrum suitable for all AP Racing Carbon / Carbon and Sintered or Cerametallic Racing Clutches.

Within the range there are three types of Release Bearing Available.

STANDARD RELEASE BEARING 35mm Inside Diameter
- Outer Race Rotates

CP3457-1 Release Fulcrum Dia 'A'= 50mm
This bearing is suitable for use with most Ø115, Ø127 & Ø140mm racing clutches.

CP3457-2 Release Fulcrum Dia 'A'= 54mm
This bearing is suitable for use with most Ø184, Ø200 & Ø215mm racing clutches.

STANDARD RELEASE BEARING 40mm Inside Diameter
- Outer Race Rotates

CP3457-9 Release Fulcrum Dia 'A'= 50mm
This bearing is suitable for use with most Ø115, Øl27 & Ø140mm racing clutches.

CP3457-10 Release Fulcrum Dia 'A'= 54mm
This bearing is suitable for use with most Ø184, Ø200 & Ø215mm racing clutches.

HIGH SPEED RELEASE BEARING
- Inner Race Rotates

CP3457-11 Release Fulcrum Dia 'A'= 50mm
This bearing is suitable for use with most Ø115, Ø127 & Ø140mm racing clutches.

CP3457-6 Release Fulcrum Dia 'A' = 54mm
This bearing is suitable for use with most Ø184, Ø200 & Ø215mm racing clutches.

CP3457-16 Release Fulcrum Dia 'A'= 38mm
This bearing is suitable for some Ø115mm racing clutches, and clutches from other manufacturers.