The new catch tank kit is a new addition to compliment AP Racings Reservoirs range. This Catch tank kit is an alternative fluid surge system to traditional bellows without compromising reservoir capacity. This Catch tank kit is suitable for all AP Racing reservoirs and can be used in all competition.

Kit includes

- 1 x Catch tank

- 75cm of silicone tube

- 3 x Nipples with washers and nuts

- 1 x T connector

- 2 x cable ties

- 4 mounting blocks

A small diameter plastic reservoir with central outlet which can be screwed directly into a master cylinder.

- Available in a choice of 3 volumes.

- ORing seal supplied.

- CP2709-156 bellows available.

- Push on connector for remote cylinder available - CP4709-107.

- Part numbers

- CP4709-10, -11 & -12 will screw directly onto, CP2623, CP4623, CP5623 and CP6093 cylinders by removing inlet adapter.

- CP4709-13, 14 & -15 are for remote use but will fit directly to CP4400 master cylinders.

- CP4709-16 & -17 are for remote use only.

Please refer to this leaflet for fitting instructions.

- A remote plastic reservoir, accepts Ø5/16" hose.

- Complete with heavy duty cable tie & nylon saddle.

- Volume = 183cm³ (11.3in³).

- No Diaphragm available.

- Replaces 112009 Reservoir

CP4773 reservoir capacity is midway between, CP4709 and CP2293-141/3 types.

Both assemblies have an offset outlet and are fitted with bellows (CP4773-102). Volume = 195cm³.

- A large capacity plastic reservoir with offset outlet which screws directly into the master cylinders detailed below.

- Can be supplied with or without rubber diaphragm.

- Supplied complete with cap 4325-148 7 adapter.

- CP2293-141 & -143 suitable for: CP2623, CP4400, CP6093

- CP4323-7 & -8 suitable for: CP 4623, CP5623.

- To rotate reservoir unlock nut included and reposition, the re-tighten.

- Two extra large capacity plastic reservoir with either offset or central outlets which screw directly into all master cylinders with 7/16" UNF inlet thread or can be used remotely.

- Volume = 340cm³ (20.7in³).

- Supplied with CP2293-166 rubber diaphragm (bellows) to minimise entry of moisture, dirt and help prevent spillage.

- Supplied complete with cap 4325-148 & adapter.

- A large capacity remote plastic reservoir with 1 outlet.

- CP2293-69 supplied with diaphragm (bellows).

- 4342-372 supplied without diaphragm (bellows).

- Accepts Ø5/16" diameter hose.

- Volume = 280cm³ (17.1in³).

- Supplied complete with cap 4325-148 adapter.

- A large capacity remote plastic reservoir with 1 outlet.

- CP2293-85 supplied with diaphragm (bellows).

- 4342-355 supplied without diaphragm (bellows).

- Accepts Ø 5/16" diameter hose.

- Volume = 280cm³ (17.1in³).

- Supplied complete with cap 4326-148.

CP2709-156 (small)

- For use with reservoir cap 4325-151, on the CP4709 reservoir assemblies.

CP2293-48 (medium)

- For use with reservoir cap 4325-148, on the following reservoir assemblies;

   - CP2293-141, -143 & -69

   - CP4623-7, -8, -9 & -10 

CP2293-166 (large)

- For use with reservoir cap 4325-148, on the following assemblies:

   - CP2293-162 & 163