| |
|
| |
| Brake Fluids - AP Racing |
|
AP Racing brake fluids have been developed specially for use under arduous conditions encountered at the highest levels of motorsport.
AP Racing brake fluids are compatible with all conventional hydraulic brake systems. Note: Before using any AP Racing fluids all existing brake fluid should be drained and thoroughly purged with new AP Racing fluid and then filled completely with AP Racing fluid
|
AP Racing DOT 5.1 Brake Fluid
|
|
Formula DOT 5.1 is AP Racing's high performance non-silicone based brake and clutch fluid. Formula DOT 5.1 is recommended for use in the hydraulic brake and clutch systems of all cars, for which non-petroleum based fluid is specified. Suitable for high performance applications including vehicles fitted with ABS and ESP, is suitable for road and track day use. Available in 500ml bottles and also by the case - 20 x 500ml
Typical boiling points
- New Dry > 260?C
- 'Wet' E.R. > 184?C |
 |
| AP Racing 600 Brake Fluid |
|
AP Racing 600 has a dry boiling point exceeding 300?C and has been developed for racing applications were high temperatures are being experienced, eg. when using carbon discs and the ultimate in brake fluid performance is required. It should be noted that before using 600 fluid, any existing brake fluid should be drained completely from the brake system. The system should be thoroughly purged with the new 600 and filled completely with new 600 fluid. Available in 500ml bottles and also by the case - 20 x 500ml
Typical boiling points
- New Dry > 300?C
- 'Wet" E.R. > 210?C |
 |
|
AP Racing PRF 660 Brake Fluid
|
|
AP Racing 600 has a dry boiling point exceeding 300?C and has been developed for racing applications were high temperatures are being experienced, eg. when using carbon discs and the ultimate in brake fluid performance is required. It should be noted that before using 600 fluid, any existing brake fluid should be drained completely from the brake system. The system should be thoroughly purged with the new 600 and filled completely with new 600 fluid. Available in 500ml bottles and also by the case - 20 x 500ml
Typical boiling points
- New Dry > 300?C
- 'Wet" E.R. > 210?C |
 |
|
AP Racing DOT 551 Brake Fluid
|
|
AP Racing 551 is suitable for all forms or motorsport and conforms to FMVSS 166 DOT3 specification and is magnesium compatible but has a higher boiling point than normal brake fluids intended for road use. Available in 500ml bottles and also by the case - 20 x 500ml
Typical Boiling points
- New Dry > 275?C
- "Wet" E.R. > 150?C |
 |
| |
| | |
